Naples

From 2007.igem.org

Revision as of 16:04, 9 September 2007 by Robertina (Talk | contribs)

Contents

University of Naples "Federico II"

                           UniversitàFedericoII.jpg

Tigem

       Tigem.jpg

The Telethon Institute of Genetics and Medicine (TIGEM) was created by the Italian Telethon Foundation in 1994. TIGEM mission is the understanding of the pathogenic mechanisms of genetic diseases with the aim of developing preventive and therapeutic strategies.TIGEM currently hosts 17 research groups, and a total of more than 120 persons, including students, postdoctoral fellows, staff scientists, technicians, and administrators and offers training programs in medical human genetics and Synthetic Biology in cooperation with the University of Naples Federico II.

== About Us == Flaskshaker.gif

  • Students:
    • Giovanni Russo
    • Lucia Marucci
    • Velia Siciliano
    • Irene Cantone
    • Roberta Bergamasco
    • Maria Aurelia Ricci
    • Mafalda Graziano
  • Instructors
    • Diego di Bernardo
    • Maria Pia Cosma
    • Mario di Bernardo
  • Advisor
    • Giulia Cuccato

Our Project

The aim of our project is to engineer a synthetic biological network in yeast able to detect the quality of olive of oil, one of the most famouse product of Italy, now possible only through expensive and not-portable machines. In order to achieve this, we will modify Saccharomyces cerevisiae cells so that they will be able to change colour at differents oleate concentrations.

                         YeastRed.jpg         SGFP.gif

Oleate is the principal olive oil element and acidity indicator. The olive oil is defined "extra vergine" if it has an acidity lower than 0.8 %,"vergine" with an acidity lower than 2% and not edible if has an acidity higher than 3%. Oleate induces the transcription of genes involved in peroxisome biogenesis and stimulates the proliferation of these organelles in Saccharomyces cerevisiae. Fatty acid-mediated induction is based on a dramatic increase in transcription of several genes encoding peroxisomal functions due to the presence of an oleate response element (ORE) in their promoters.This upstream activating sequence is minimally defined by an inverted repeat of CGG triplets separated by a 15-18-nucleotide spacer. It constitutes the binding target for the transcription factors Oaf1p and Pip2p.

Modeling

Introduction

Over the past decades progress in measurement of rates and interactions of molecular and cellular processes has initiated a revolution in understanding of dynamical phenomena in cells. Generally speaking a dynamical phenomenon is a process that changes over time. Living cells are inherently dynamic! Indeed, to sustain the characteristic features of life (growth, cell division...) they need to extract and transform energy from their surroundings. This implies that cells function thermodinamically as open systems. So, we have encountered a new keyword: system. The most general definition for system is the following: a set of functional elements joint together to perform a specific task. Cells are astoundingly complex systems: they contain networks of thousands of biochemical interactions. System-level understanding, the approach of systems biology, requires a shift in the notion of what to look for. An understanding of genes and proteins is very important, but now the focus is on understanding system' structure and dynamics. Biologists use cartoons to capture the complexity of the networks, but because a system is not just an assembly of genes and proteins, its properties cannot be fully understood by drawing these diagrams. They, of course, represent a first step in our modeling, but can be compared to static roadmap, whereas what we really seek to know are the traffic patterns, why they emerge, how to control them. So, we will use a typical approach from systems and control theory.

Basic assumptions

We realized a reaction network as a system of ODEs. Clearly we need to guess working hypothesis:

  • Component concentrations don't vary with respect to time

Whether it is a good assumption depends on time and space scales. In a yeast cell molecular diffution is sufficiently fast to mix proteins in less than one minute

  • Component concentrations are continuous functions of time

This is true if the number of molecules of each species in the reaction volume is sufficiently large

Other important assumptions are the following:

  • Transcription factor timescales are much larger than protein-protein interactions timescales
  • Input changes are very rapid

We will use this assumptions to simplify our modeling

ODEs are very useful to represent molecular interaction. Indeed, applying a simple set of rules we can represent arbitrarily complex reaction networks as a set of coupled ODEs!

Our model

[INTERNAL COMMENT: GUYS CAN YOU PLEASE DO A FIGURE THAT SHOWS ALSO THE INPUTS AND THE PROMOTERS? ]

After some brainstorming we found the best parts for our project. They are showed above:

          Igemmodeling1.jpg          Igemmodeling2.jpg

In the left picture the genes are represented; red link indicates a protein-protein interactions, while green link indicates a transcription factor interaction. It's clear that Pho80Pho85 inhibits Pho4, so if Pho80Pho85 is active then Pho8 is low even if Pho4 is active (design task). If Pho80Pho85 is inactive and Pho4 is active, then Pho8 becomes active. If Pho80Pho85 and Pho4 are inactive, than Pho8 is inactive. The inhibition of Pho4 by Pho80Pho85 is at protein-protein level: if Pho80Pho85 is active, Pho4 is phosphorylated and its concentration becomes rapidly small.

The input to the system will be the level of oleic acid that will drive expression from appropriate promoters responsive to oleic acid cloned upstream of Pho80Pho85 and Pho4.


The outputs of the system will be Pho80Pho85 and Pho8 and we will associate them red or green lights! We recall that, for 100 gr of the oil, it will be:

  • extra virgin, if the oleic acid conentration will be less than 0.8 gr
  • virgin, if oleic the acid concentration will be less than 2 gr
  • not edible, if the oleic acid concentration will be greater than 3-4 gr

Now, we need to convert gr in mol and we found that:

  • the oil is extra virgin if the oleic acid concentration is less than 2.8 mM
  • the oil is virgin if the oleic acid concentration is less than 7.1 mM
  • the oil is not edible if the oleic acid concentration is greater than 7.1 mM

therefore we need two promoters able to activate Pho80Pho85 expression when the oleic acid concentration is greater than 7.1mM and sensitive to concentration greater than 2.8mM.

Mathematical model

We modeled the transcriptions factor interactions as Hill-like functions, while the protein-protein interactions are represented through a typical prey-predator model. All the hypotesis were used to get the ODE model. For the transcription factor level we have the following equations:

                            Igemmodeling3.jpg

In the equations SA and SB indicates the inputs, i.e. if an oleate level is passed. Notice that the second assumption is used to obtain this equations form. [Pho4free]is the Pho4 concentration (the output from protein-protein interaction) that participates to transcription factor interaction. To get this value we write the equation for protein-protein interaction:

                           Igemmodeling4.jpg

Using the first assumption we can obtain an expression for [Pho4free] in terms of [Pho80Pho85] and [PhO4] using steady state solution. The third equation in the ODEs system will become:

                          Igemmodeling5.jpg


System analysis and simulations

The system was studied analytically and numerically. Both studies showed an unexpected structural stability property in the parameter range of physical interest. Indeed, we get an analytic expression for the Jacobian matrix (a diagonal matrix) whose determinant becomes 0 only if almost one of basical diluition factor becomes 0. After a careful study we found the reason of this behavior in the modeling process, particularly in the use of the second assumption. Matlab, Mathematica and Matcont were used to complete the study with simulations and bifurcation diagrams that confirmed the previous analytic study. The following pictures shows the bifurcation diagram of [PHO8], an output of the system. This diagram shows the property of structural stability, i.e. non bifurcations are found:

                           Bifurcation1.jpg
                           Bifurcation2.jpg
                           Bifurcation3.jpg

The bifurcation diagrams for [PHO80PHO85], the other output of the system, are qualitatively the same, so they are not showed here. The continuation software used is Matcont. Once we get the steady state behavior of the outputs separately, we have to choose some index for the performances of the system. The ratio between the two outputs, i.e. PHO8/PHO8085, appears to be appropriated for our purpose. The following pictures shows PHO8/PHO8085 at the varying of two parameters:

Bruteforce1.jpgBruteforce2.jpg
Bruteforce3.jpgBruteforce4.jpg
Bruteforce5.jpgBruteforce6.jpg

From the sowed pictures we find that the ideal choise for our parameters that assures the best performances will be: K1>>K3, K2>>K3, K2=K1. These reasoninge will be confirmed and strengthened by the following analysis, in which we will introduce oleic acid into the model. Notice that the model uses SA and SB as input and they are independent from the oleic acid concentration: now we want to study the behavior of the system using SA and SB as functions of oleic acid concentration (o.a.), i.e. SA(o.a.), SB(o.a.). For this purpose we used data from luciferase assay. We imported this data in Matlab and the results are the following input curves:

                           Input1.jpg
                           Input2.jpg

Using these input functions and varying parameters, we get the following response curve:

                           Resp1.jpg
                           Resp2.jpg
                           Resp3.jpg

It's clear that k1=0.1 and K1=0.5 doesn't ensure a correct behavior of the system: the repression of PHO8 is too weak when the oleic acid concentration becomes greater than 7.1 mM! We repeated the same analysis for the varying parameters K2 and K3 and we found that a good behavior is given by k2=1 and k3=0.1. This is confirmed be the following pictures:

                           Resp4.jpg
                           Resp5.jpg
                           Resp6.jpg
                           Resp7.jpg
                           Resp8.jpg
                           Resp9.jpg

To get informations about the transient response of the system and to test the detected parameters we used a new Matlab file which simply simulates the system. The three picture we present shows the system's response in three working conditions:

  • extra virgin oil
  • virgin oil
  • not edible oil

These conditions are simulated by setting proper values for SA and SB.

                           Sim1.jpg
                           Sim2.jpg
                           Sim3.jpg

Yeast Strain

Yeast strain used is W303.

All DNA manipulations and subcloning were done in Escherichia coli.

Materials & Methods

We have adopted a strategy of parallel cloning.

A reporter gene is cloned in parallel into a vector containing one and two tandem copies of the oleate response elements from the FOX3 gene.

Cloning Strategies in E.coli

    • Vector choice
    • Restriction Enzyme
    • Primers Design

Psb1A3map.jpg Gfp-report2.jpg

Cloning Strategies in S.cerevisiae

    • Vector choice

Our finally vector will be YCplac22.This is a centromeric plasmid,with trip resistence,it's long 4854pb.

    • Restriction Enzyme

We have choice HindIII and BamHI to promoter insertion and BamHI and SacI to firefly luciferase insertion.

We have cloning one(1ORE)and two tandem copies of the oleate response elements (2XORE) from the FOX3 gene inserted upstream of a minimal CYC1 promoter.This promoter is realized to driving the expression of firefly luciferase.

YCplac22 map.jpg

    • Cloning Process

-PCR

We have design two oligo primers for 2Xore,1ORE and Luc with our restriction enzyme to amplify from plasmid p2UG-2XOre-Luc:

2X ORE – CYC1 Hind III ORE Fw 5’-CCC AAGCTT TAGTCAATAATGGGAGCTGG-3’ Tm 62°C

2X ORE – CYC1 BamHI Rev 5’-CGC GGATCC GTGCGTTTGTGGCGCCCTTA-3’ Tm 68°C Oligo.jpg

1X ORE – CYC1 Hind III ORE Fw 5’-CCC AAGCTT GGCTCTACCGAGCTGGTAGA-3’

1X ORE – CYC1 BamHI Rev 5’-CGC GGATCC GTGCGTTTGTGGCGCCCTTA-3’

LUCIFERASE BamH1 Fv 5’- CGC GGATCC ATGGAAGACGCCAAAAACATAA-3’ Tm 60°C

LUCIFERASE SacI Rv 5’- CGC GAGCTC TTAAAGCTTCTTTCCGCCCTT-3’ Tm 60°C

- Digestion of fragments and vector Ycplac22

- Ligation

- Transformation in E.coli

- Mini and Midi prep

- Transformation in S.cerevisiae

- Yeast Experiments

For luciferase assays and the preparation of protein extracts, transformants were grown in rich medium with 1.5% raffinose, 1.5% glycerol, and 1% ethanol as carbon sources. Induction was done with different concentrations of oleate overnight.Cells were lysed in 100 mM potassium phosphate pH 7.8, 1 mM phenylmethylsulfonyl fluoride, 1 mM dithiothreitol using glass beads (diameter 0.45 mm). Cell debris were removed by centrifugation at 15 000 x g at 4°C for 20 min.Luciferase activities are expressed in relative light units/pg protein and protein concentrations were determined by the method of Bradford using bovine serum albumin as a standard.

LucAssay result :

LucGraph.jpg

2XORE promoter have a minimal basal activity without oleate and we can see a proportionally increment when increasing oleate concentrations