Tianjin/DIODE

From 2007.igem.org

< Tianjin
Revision as of 02:56, 24 October 2007 by Lovecarrot (Talk | contribs)

Design

Bio-diode: The diode, which is one of the most common parts in the electric integrate circuit and electronic equipment, plays the function of letting the current get through when the diode is positive-biased, and cut off when it is negative-biased. When the negative voltage increases to a certain value, the diode tends to be negatively broken down. In this project, the molecular signal AHL is treated as the current of electric circuit, the sources, amplifiers, blocks and lamps cells are constructed with the parts provided by MIT and then are equipped in series in order to achieve the cellular and molecular biological diode. TJU1DD001.gif

TJU1DD001.jpg

Experiment

1.RFP fluorescence of the decter at different cell cencertration
TJU1DE002.jpg
TJU1DE003.jpg


2.GFP fluorescence of the decter at different cell cencertration
TJU1DE004.jpg


3.GFP fluorescence of the decter at different cencertration of AHL
TJU1DE001.jpg


Modeling

We use ODEs to simulate the system. Datas used in the model are based on the literature and would be adjusted to match the experimental results.In the model we assume that the flux through each pipeline is identical and the block maintains a stable state. The simulation result is as follows:


Amplifier
1.relation between the input concentration of the amplifier and the output concentration of the amplifier

TJU1DM001.jpg

2.relation between the flux of the amplifier and the output concentration of the amplifier

TJU1DM002.jpg



Block
1.relation between the input concentration of the block and the output concentration of the block

TJU1DM003.jpg

2.relation between the flux of the block and the output concentration of the block

TJU1DM004.jpg

3.relation between the concentration of AIIA in the block and the output concentration of the block

TJU1DM005.jpg

4.relation between the flux of the block and the output concentration of the block in different concentration of AIIA

TJU1DM006.jpg



Flow direction from amplifier to block
1.relation between the concentration and the flux at different proportion between the volume of the ampilier and the volume of the block.(the left image is a part of the left image)

TJU1DM007.jpgTJU1DM008.jpg



Flow direction from block to amplifier(breakdown)
1.relation between the concentration and the input concentration at different proportion betweeen the volume of the amplifier and the volume of the block.(the concentretion contains two curves,the amplifier(the output concentration) and the block)

TJU1DM009.jpg

2.relation between the concentration and the input concentration at different concentration of AIIA.(the concentretion contains two curves,the amplifier(the output concentration) and the block)

TJU1DM010.jpg

3.relation between the concentration and the input concentration at different flux.(the concentretion contains two curves,the amplifier(the output concentration) and the block)

TJU1DM011.jpg