From 2007.igem.org

Revision as of 15:14, 25 October 2007

Results

Gene Splitting

Figure 1: The negative control (hixC-GFP2) on the left does not fluoresce, but the experimental split GFP (Plac-RBS-GFP1-hixC-GFP2) on the right does.

We were able to split two genes: GFP and RFP. Split GFP has strong green fluorescence. Split RFP's red color is much reduced compared to wild-type RFP. It takes overnight incubation at room temperature for the red color to be visible in white light. Both colors are fluorescent under UV light, although the green color predominates. In the first image below, a negative-control (on the left) does not fluoresce, but split GFP (on the right) does.

We also wanted to test fluorescence phenotypes with both proteins in the same cells. Below on the left are cells containing both split GFP and split RFP, downstream of the T7 RNA polymerase promoter and co-transformed with T7 RNA polymerase plasmid. These cells look bright green, but the red color is hard to see under UV light. Under white light, the green color is not apparent, but the cells are a little pink. The cells only containing split RFP, on the right, are clearly pink under UV light. However, not all cells are equally colored - some are greener than others, which is a curious result as the cells do not contain GFP of any form.

Figure 2: On the left, cells with the T7 RNA polymerase plasmid and a plasmid containing both split RFP and split GFP. These cells fluoresce a bright green under UV light and look pink under white light. On the right, cells with the T7 RNA polymerase and only split RFP demonstrate red fluorescence of varying intensities.

In addition to the regular split GFP and split RFP constructs, we also wanted to test some "hybrid" constructs to ensure that they would not fluoresce. GFP and RFP have similar structures and functions. Previous studies have shown that it is possible to modify GFP to display a wide range of color phenotypes. We created the following parts: Plac-RBS-RFP1-hixC-GFP2 and Plac-RBS-GFP1-hixC-RFP2. A plasmid may, at some point during its flipping process, contain such sequences. We tested to make sure that the similarity of these two proteins did not make them compatible enough to fluoresce. It was found that neither of these parts show any fluorescence or color change.

Constructs

Once we managed to split two genes we proceeded to implement two different graphs in plasmids.

Graph A: This graph contains 3-nodes and 3-edges. We wanted to find a Hamiltonian path from the node representing RFP (colored in green) to the node representing the transcriptional terminator (colored in red).

Graph B: This graph also contains 3-nodes and 3-edges, however it provides the possibility of a false positive solution.

We built the following constructs:

• Positive Control to both A and B
  
• Solved Orientation - Graph A
  
• Easy Orientation - Graph A
  
• Difficult Orientation - Graph A
  
• Difficult Orientation - Graph B
  

Part Flipping and Computation

Co-transformation of the unsolved HPP plasmids with the Hin vector begins flipping and computation. Subsequent co-transformation with the T7 RNA polymerase vector then initiates transcription.

We have found that all colonies with the HPP plasmids showed unexpected green color. The green is distinguishable by eye or fluorometer from GFP's color. As a control, we showed that the T7 RNA polymerase vector does not create the green color, so we are confident that the HPP vectors are responsible.

One possibility we had tested was that hybrid parts, such as RFP1-hixC-GFP2 and GFP1-hixC-RFP2 produced functional fluorescent proteins. However, we created these parts and tested them, and found that there was no fluorescence when the pLac promoter was upstream (parts [http://partsregistry.org/Part:BBa_I715035 BBa_I715035] and [http://partsregistry.org/Part:BBa_I715036 BBa_I715036]).

Another possibility is that these hybrid proteins cannot fluoresce independently, but will emit color when in tetramers. Wild-type GFP and RFP are tetrameric, but the registry versions of the parts, [http://partsregistry.org/Part:BBa_E0040 BBa_E0040] and [http://partsregistry.org/Part:BBa_E1010 BBa_E1010] are monomeric mutants. It would be possible to test this hypothesis by running purified protein on a non-denaturing gel.

Figure 3: Cells with only the T7 RNA polymerase plasmid, shown under UV light. There is no fluorescence.

Figure 4: Cells with both the T7 RNA polymerase plasmid and the flipped Hamiltonian Path Problem plasmid, shown under UV light. There is visible green fluorescence.

Flipping Detection by Phenotype

Missouri Western built 3 constructs each representing one of the problems. They were labeled as ABC, ACB, and BAC with ABC a positive control as an already solved problem, ACB as a medium difficulty problem, and BAC as a difficult problem.

Figure 5: Construct ABC ([http://partsregistry.org/Part:BBa_I715042 I715042]), ACB ([http://partsregistry.org/Part:BBa_I715043 I715043]) and BAC ([http://partsregistry.org/Part:BBa_I715044 I715044])

Each of the three constructs ABC, ACB, and BAC were used to transform E. coli cells that express T7 RNAP. As expected, the ABC transformance glowed yellow (red + green), the ACB transformance glowed red, and the BAC transformance did not glow. A fragment containing the Hin expression cassette (pLac-RBS-Hin-LVA, [http://partsregistry.org/Part:BBa_S03536 BBa_S03536]) was ligated into each of the ABC, ACB, and BAC constructs and transformed into T7 RNAP cells. A colony from each was picked and grown overnight for plasmid mini-prep. Each of the three constructs was restriction digested and the insert sizes were varified to be correct. The three constructs were then retransformed into T7 RNAP cells and the resulting transformation mixture was streaked for colony isolation.The Hin ABC plate produced mostly yellow colonies but also red and green. The Hin ACB plate started off to be red and produced green and yellow colonies. The Hin BAC plate produced mostly nonfluorescent colonies with a few green and red colonies.

Figure 7: ABC

Figure 8: ACB

Figure 9: BAC

Figure 10: ABC+Hin

Figure 11: ACB+Hin

Figure 12: BAC+Hin

Figure 13: ABC+Hin

Figure 14: ACB+Hin

Test

Flipping Dectected by PCR

In order to provide physical evidence of Hin-mediated DNA rearrangement, we designed PCR primers that would allow us to determine the position of one of the GFP2 gene half. The experiment below shows the results of PCR using the universal primer G00101, which binds to vector sequence 3' to the biobrick suffix, and primer GFP2-forward.
Here is how the primers bind to the three constructs called ABC, ACB, and BAC:

Lane 1 : MW marker (50, 100, 200, 300, 400, 500, 750, 1000 bp), Lanes 2-4 : ABC with 14, 16, and 18 cycles, Lanes 5-7 : ACB with 14, 16, and 18 cycles, Lanes 8-10 : BAC with 14, 16, and 18 cycles

Dectection of Fluoresence by Spectroscopy

We used a fluorescent spectrometer to measure the fluorescence of wild type GFP, wild type GFP, the versions of these two split by hix sites, and new combinations of the GFP and RFP gene halves. We were able to detect fluorescence in bacterial cells by simply mixing the cells with 200 ul of water and measuring in a microtiter plate.

We first had to determine the excitation and emission wavelengths that would allow us to detect the green and red fluorescence. Scans were conducted in order to find these wavelengths. For example, the graphs below shows scans of excitation wavelengths that produce fluorescence at an emission wavelength of 515 nm, the wavelength we found to be best for green, and 608 nm, the best wavelength for red.

Sample 1 = pLac GFP1-hix-GFP2, glows green on UV box
Sample 2 = pT7-RFP1-hix-RFP2-GFP1-hix-GFP2-TT-hix-RFP2-TT-hix , glows yellow on UV box
Sample 3 = pT7-RFP1-hix-RFP2-GFP1-hix-RFP2-TT-hix-GFP2-TT-hix , glows red on UV box
Sample 4 = pT7-RFP1-hix-GFP2-TT-hix-RFP2-GFP1-hix-RFP2-TT-hix , does not glow on UV box

On the basis of these scans, we used excitation/emission wavelengths of 450 nm / 515 nm for green and 560 nm / 608 nm for red.