Alberta/Calender/August

From 2007.igem.org

< Alberta | Calender
Revision as of 23:26, 16 August 2007 by Edul (Talk | contribs)

Contents

August

August 2007
Su M Tu W Th F Sa
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31


To July 2007
To September 2007
Back to UofA iGEM Home

August 1

Schedule: CZ,NG,VH

General Notes:
1. Run gel of B0034 SpeI/PstI double digest; extract gel with QIAgen kit; stored in freezer.
2. PCR for
a. Enny + B0034 miniprep 1 to 8
b. Betty colonies (10)
c. Buddy colonies (10)
Follow James' protocol. Also see blackboard for James' comment about PCR.

For tomorrow
1. run gel of PCR prodcut which are in the thermocycler �
2. check restreaked single colonies of the Betty and Buddy colony PCR
3. grow up Betty and Buddy overnight and for miniprep and ligation later
4. Make Amp plates (we only have 4 more)
5. Autoclave test tubes

Quotes of the day: We are tired.

to the top

August 2

Modeling Meeting @ 1830hrs in CAB373
General Meeting @ 1900hrs in CAB373
Party afterward's @ Garneau pub

Schedule:

MC, JP & AF are meeting at 1700hrs to get some stuff done before the meeting happens; come join in the fun if you'd like.

Lab Notes:

Made AMP plates
Autoclaved test tubes
Ran gel of ?
Started O/N of Buddy & Betty
Checked restreaked colonies of Buddy & Betty --> positive growth except for 9&10 but this is expected because they are controls

James did a loving PCR of Benny in B0034

-MC, ED, JP, JB


to the top

August 3

Schedule:

Nik cant make it he just isn't crazy enough looks like justin is currently the only one crazy enough
Michelle & Justin are now the long weekend crew - be prepared for ILLUSIONS!!!! or perhaps just some awesome pipetting techniques while they're prepping to champ out at the ULTIMATE pipetting Olympiads.


Meeting @ 1700hrs

Captain's Log, Stardate: 080307-1153

Minipreps of lifeforms Buddy and Betty
Not enough room in box with blue tape, designed a new holding vessel (i.e. box with white tape below box with blue tape in the freezer) for minipreps of aforementioned lifeforms.
-JB

Made gel
Digested (double) Buddy & Betty minipreps
Digest (single) I0500 - from tube we believe is a miniprep in the -20 freezer
weekend to-do list
-JP, ML, MC


to the top

August 4

Meeting at 1000hrs - Michelle will definately be there at 1000 Justin is expected at 1030


Lab Notes:

Made a project timeline - check out the cabinets on the left side of the 4C-degree fridge
Ran gel - no bands for I0500 (we were sad) but there are awesome bands of Betty & Buddy
Attempting to figure out the I0500 problem; transformed into XL10 Gold & HB101

-MC, JP, ML

to the top

August 5

Meeting at 1000hrs - Michelle will definately be there at 1000 Justin is expected at 1030 Lab Notes:

1-transform I0500 into HB101 and XL10 gold
2-restricted mini's of Buddy and Betty with Xba/Pst (confirmed with gel their presence yesterday)
3-ran I0500 samples in gel and no DNA present, chucked out samples - re transform...
-MC, JP & ML (in spirit)

For Tomorrow

1-gel purify Buddy and Betty
2-ligate Buddy and Betty into Boo34 (overnite)
3-start ONs of I0500 for mini on tuesday

to the top

August 6

Meeting at 1000hrs - Michelle will definately be there at 1000 Justin is expected at 1030

Lab Notes:

- JP, ML, AF, MC

Notes:

1- re-plated I0500 tranformations on Kan and AMP plates - hope for growth
2- ran buddy and betty XbaI/PstI restriction products on gel and gel extracted
3- began ligation reaction with B0034 (in back shaker at 13 degrees)
4- started making butanol plates...but it might not work so well with higher percentages because when you plate the agar its warm/hot and when you add the butanol it bubbles like mad (evaporates). We tried pouring at lower temp, but it prooved disasterous

Fact of the Day

A good ligation is like a hoola-hoop, they're both circular and only one is methylated

to the top

August 7

Schedule:

MC,VH,AF

Protocol for Today

1: If there is growth on I0500 plates in 37degrees, make some overnites of 5 colonies (4ml LB + 2.4microL KAN [in buffer box]in shaker tubes and innoculate with bacterial colony and place in shaker at 37degrees overnite -circle each colony you pick and match with respectively labeled shaker tube)
2: Take the two ligation mixtures from the back room shaker- transform into XL10Gold bacteria- for each of the sample make two dilutions.
dilute (1)2microL into 8microL water and
(2)1microL into 9microL water.
Take the four samples and transform them (dilute in 600microL LB before puting into shaker.
Plate each transformant onto AMP plates in two dilutions:
(1)200microL on a plate
(2)50microL + 50microL LB.

Lab Notes:

No growth on Kan plates of I0500 in HB101 - therefore no O/N
Transformations of Buddy+B0034 Ligations & Betty+B0034 Ligations into XL10GOLD competent cells
- Betty+BOO34 10x = 1ul Lig + 9ul H20 (the number on the side of the eppendorf denotes the ratio of vector to insert in the lab book) 20x = 2ul Lig + 8ul H20
- labelling same for Buddy+BOO34

- MC, VH, AF

to the top

August 8

Today is sweatpants day. Wear your favorite pair.

The last of the synthetic genes has arrived (butyraldehyde dehydrogenase = BuAld_DH). I resuspended the plasmid in 40uL TE and put the red capped tube (with a pink tape flag) in the freezer in G308 - MKD

LAB NOTES:

1: transformed buAld_DH "Diezel Blaze" into XL10 gold need to grow up for mini tomorrow nite
2: colony PCR on buddy and betty in Boo- reactions are in PCR machine (hopefully at 4 degreesC)
3: started Chlorobium medium/concoction need some more compounds

-JP,ED,AF

Schedule:

ED,NK,JP


to the top

August 9

Schedule:

ED,AF,JG

Lab Notes: -poured 1%-4% butanol-LB plates - added butanol to each individual plate as it was cooling. plates are on bench #3

-ran gel of PCR of Buddy and Betty in Boo. Looks like all colonies tested were positive. Started overnights of positive colonies for glycerol stock and miniprep tomorrow.

-set up PCR using VF and VR and 0.5 uL of 1/10 dilution of I0500 stock as template. Mg titration of 1,2,3 mM. Need to be run on gel tomorrow

-started overnights of Diezel Blaze for miniprep and glycerol stocks

-ED,MC,JG



Modeling meeting cancelled as Nick G. and Doug are both away - WM

to the top

August 10

Schedule:

CZ, ML, JG
Thanks for taking my shift ML - MC
Please note that if you cannot make a shift we have already discussed that you are to call the lab phone number which is in previous minutes - I can send it out with the next minutes just in case. - MC&JG

Lab Notes:

Minipreps and glycerol stocks of Buddy and Betty in Boo and Diezel Blaze were done and stored in box with green tape.

Tonight: run I0500 PCRs on gel, digest Diezel Blaze to clone into Boo, start mutagenesis experiments, transform some new promoters

This weekend: we can start cloning our genes into J61003 with this promoter and then swap the promoters later if we want (this was the reason for picking J61003), also we need to wash and autoclave culture tubes

-ED

Lab Notes

Ran gel of pcr product no bands where observed. PCR reminants are stored in -20 freezer.

Double digest of diesel blaze pst1 xba1, Stored in -20 freezer

Gel already prepared on the second bench.

Culture tubes have been wash but need to be autoclaved tommorrow

ACTION ITEM: decide on promoter to transform we promoter list is on the mac computer.

Uplifting thought:

A negative result is still a useful result. As long as it is within errors it is still valid.


to the top

August 11

Schedule: 9:00am sharp as a needle

JP, AL, NK

1. got a hold of Meagan at MIT and she's sending a stub of IO500 bacteria. we should get it early next week I hope!

Lab Notes:

1- organized all important samples into new box in -20 (all coding sequences in Boo) These will need to be restricted with Xba/PST for ligation into J61003 later
2-started ligation on Diezel into Boo (samples at the front of the room on bench - need to transform tomorrow asap)
3- autoclaved

to the top

August 12

Schedule:

CZ, AL, NK

Celine: wanna meet up at noon? AL

Lab Notes There was a misunderstanding about the Diezel Blade double digest. On Friday, we only did the digest but did not run a gel or perform gel extraction. So the ligation mixture from Saturday was discarded because B0034 was ligated to the double digest mixture directly.

Today we ran the remaining double digest mixture; however it did not cut.

Also we transformed Bba_I13453 (pBAD promoter by itself) just in case on Amp plates, which are in 37 degree incubator.

For tomorrow 1. Take out I13453 plates and put in 4 degree fridge (Celine will do this early morning around 8am) 2. Pick colonies for I13453 and grow in Amp-LB overnight 3. Double-digest of Diezel, run gel, gel extraction, ligation with B0034.

Justin, can I swap with you for Monday because I may not make it on Thursday if we are doing labwork before the meeting? Email me to confirm. Thanks. - CZ

to the top

August 13

Schedule:

ML,JG,JP

Omniscient Notes:

1- Label Tubes Well - There is nothing worse than having to redo your samples because you don't know what each tube is. Aside of our coding namings Benny, betty etc, Label in detail. Always put the date on the tubes so we can always refer to the master book if we're confused

2-We need to be making better lab notes in the notebook -

"Started Overnights of..." is not acceptable. Instead, write what you added to the tube: 5uL Amp, 5mL LB, colony.

Likewise, "Double digest" is not acceptable. You need to write down what you digested and what amounts of everything has been added.

Writing in a notebook correctly is very important with this many people in the lab. If people are forgetting to add buffer to digest or antibiotics to overnights, this needs to be corrected immediately and by reading what was done in the lab book, it can be. It is much better to write too much than too little, especially if it can jeopardize the future of the project.

I know that I have been guilty of this, but we all need to improve. Everything needs to be written down.


Lab Notes:

-I took out plates for I13453 this morning and there are big colonies to pick tonight.
-Started overdays of Diezel Blaze and I13453.
-Digested D.B with Xba and Pst.
-Poured gel for use tonight.

-MC, ED

Tonight:

-Miniprep and digest I13453 with EcoR1 and Xba tonight. Miniprep and store D.B in freezer tonight (digest with XbaI/PstI).
-made glycerol stocks of each D.B and I13453




to the top

August 14

Schedule: MC,JP,ML

To Do:

1-run gel of D.B restriction products
2-gel isolate D.B (XbaI/PstI)
3-start ligation of D.B in Boo

Things We're Feeling - a monologue by Justin & Michelle (& Matt - he sends his apologies):

Ran a gel for 2 hours to try and resolve D.B (2650bp) and pUC17 (2700bp); don't laugh
Diezel Blaze is actually kind of the same size as the plasmid it came in (PUC17)

there were tears

some precision cutting happened - we're going to chance it
we hope that most of what was cut out will have mostly Diezel Blaze in it - however to compensate when Ligations are done B0034(vector) should be added in EXCESS to increase chances of B0034 + Diezel Blaze = <3

we'll have to do some colony PCR with VF/VR after transformation and the rxn's that work will be BOO34 and the ones with inserts the right size will be the correct configuration. We'll definately need to sequence...

end scene

For Tomorrow:
- gel extraction of D.B (in new box in -20)
- Ligation with excess B0034 ( 2microL Boo + 2microL D.B. and 2microL Boo + 4microL D.B.)
- expecting bacterial stub of I0050 in the mail if it is in - then grow it up

to the top

August 15

Schedule: CZ,AL,NK

Lab notes:

Gel extract Diezel Blaze using QIAgen Kit.

Ligated product with BOO34. (1:2 and 1:1 vector: insert ratio)

Also James dropped by and was wondering about sequencing. The sequencing reaction protocol is at the front counter and takes about 2 hours, perhaps we can do it on this weekend for all of the plasmids we have so far.

Where are all the plasmid maps for the genes just in case we need to find it?

to the top

August 16

Schedule:

JP,CZ,AL If lab can happen before meeting we can just leave for erins house after the meeting so you three should look into that JG

I most likely cannot meet at the lab before the meeting, but if either Erin or Justin can. I would be willing to swap. Please let me know ASAP, thanks.-CZ

I can go in before. - ED

What time are we meeting up for the lab? -AL

Post-meeting video/board game party at Erin's house if there is interest.

to the top

August 17

Schedule:

ED, AF, JG

MC available to do Lab work during the day - please notify via email if needed


to the top

August 18

Lab marathon this weekend! Start @ 10:00 and goes all day. Everyone show up.

Schedule:

ED, AL, NK


to the top

August 19

Schedule:

CZ, AL, NK


to the top

August 20

to the top

August 21

to the top

August 22

to the top

August 23

to the top

August 24

to the top

August 25

to the top

August 26

to the top

August 27

to the top

August 28

to the top

August 29

to the top

August 30

to the top


August 31

to the top


UofA iGEM Home
To July 2007
To September 2007