Peking Hop-Count

From 2007.igem.org

(Difference between revisions)
Line 1: Line 1:
-
===='''Abstract:''' ====
+
==='''Abstract:''' ===
To meet the need of spatial differentiation in an assembly line, the hop count provides the number of network devices between the starting node and the destination node. We have developed the system of hop-count conjugation for cell-cell communication within a network of Escherichia coli. Here, the signals transferred are represented by DNA sequence, and record the times of transfer by losing tandem region at every conjugation event. To construct this system, tandem oriT pairs (<bbpart>BBa_J01002</bbpart> and more) are inserted into signaling plasmid, and relaxase responsible for initiating conjugation events are removed from natural conjugation system and (attaching a terminator) inserted between these oriT pairs. At each single conjugation event, with the expression relaxase, the corresponding tandem oriT pair is lost with the rolling-cycle replication. Sequential conjugation and deletion of the different oriT pairs can be achieved by fine control of relaxase expression. The resulting tandem signaling conjugation process will allow us to develop networks of bacteria capable of sequentially assembling tasks.
To meet the need of spatial differentiation in an assembly line, the hop count provides the number of network devices between the starting node and the destination node. We have developed the system of hop-count conjugation for cell-cell communication within a network of Escherichia coli. Here, the signals transferred are represented by DNA sequence, and record the times of transfer by losing tandem region at every conjugation event. To construct this system, tandem oriT pairs (<bbpart>BBa_J01002</bbpart> and more) are inserted into signaling plasmid, and relaxase responsible for initiating conjugation events are removed from natural conjugation system and (attaching a terminator) inserted between these oriT pairs. At each single conjugation event, with the expression relaxase, the corresponding tandem oriT pair is lost with the rolling-cycle replication. Sequential conjugation and deletion of the different oriT pairs can be achieved by fine control of relaxase expression. The resulting tandem signaling conjugation process will allow us to develop networks of bacteria capable of sequentially assembling tasks.
-
===='''Achievement:'''====
+
==='''Achievement:'''===
[[Image:Peking Pass.JPG|60px]]'''Measure conjugation efficiency of multiple conjugative strains'''
[[Image:Peking Pass.JPG|60px]]'''Measure conjugation efficiency of multiple conjugative strains'''
Line 15: Line 15:
----
----
-
====Design principle====
+
===Design principle===
Two key players of bacterial conjugation from donor cells to recipients we concern here are relaxase and oriT (origin of transfer). oriT is responsible for the initiation and termination of roll-cycling DNA replication during conjugation. The transfer of conjugative plasmid from one cell to another, in the form of single strand, starts from one half of oriT and ends at another half, separated by a “nick”.  The nick site is generated by relaxosome, and relaxase is a major composition of it.
Two key players of bacterial conjugation from donor cells to recipients we concern here are relaxase and oriT (origin of transfer). oriT is responsible for the initiation and termination of roll-cycling DNA replication during conjugation. The transfer of conjugative plasmid from one cell to another, in the form of single strand, starts from one half of oriT and ends at another half, separated by a “nick”.  The nick site is generated by relaxosome, and relaxase is a major composition of it.
Line 25: Line 25:
-
====Construct signaling plasmid with tandem-oriT pairs====
+
===Measure conjugation efficiency of strain with conjugative plasmid F===
 +
{|border=''1'' cellspacing=''1''
 +
| Donor strain || Signaling plasmid || Conjugation efficiency
 +
|-
 +
| F-wild-type || one F-oriT || 0.050
 +
|-
 +
| F-wild-type || a pair of F-oriT || 0.032
 +
|-
 +
| F-oriT-Knockout || one F-oriT || 0.061
 +
|-
 +
| F-oriT-Knockout || a pair of F-oriT || 0.037
 +
|}
 +
 
 +
*Conjugation efficiency: percentage of successful conjugation events to donor cells
 +
 
 +
Conclusion:
 +
 
 +
1. The deletion of oriT in wild type conjugative plasmid increases the conjugation efficiency of signaling plasmid by 20%.
 +
 
 +
2. A pair of oriT decreases the conjugation efficiency by 40%.
 +
 
 +
 
 +
===Construct signaling plasmid with tandem-oriT pairs===
We use standard assembly protocols to construct signaling plasmid. To make sure every achievement is a solid progress to our goal, we designed a product map following industrial principle.
We use standard assembly protocols to construct signaling plasmid. To make sure every achievement is a solid progress to our goal, we designed a product map following industrial principle.
 +
 +
[[Image:Peking_Product_Map.jpg|500px]]
One outstanding achievement is that we have constructed 【brick name】 and tested it with conjugation experiment, getting a positive result with the reporter gene expressed.
One outstanding achievement is that we have constructed 【brick name】 and tested it with conjugation experiment, getting a positive result with the reporter gene expressed.
 +
 +
[[Image:Peking_oriT_pair.jpg|500px]]
 +
[[Image:Peking_GFP_both.jpg|500px]]
 +
 +
Left: After conjugation with a pair of oriT.  The reporter GFP expresses due to the deletion of terminator.
 +
 +
Right: Control strain with no GFP expressed.
Conclusion:
Conclusion:
Line 36: Line 67:
2. We successfully implemented and verified conjugation-deletion events with F system (binary hop count).
2. We successfully implemented and verified conjugation-deletion events with F system (binary hop count).
-
[[Image:Peking_Product_Map.jpg|500px]]
 
-
[[Image:Peking_oriT_pair.jpg|500px]]
+
===Construct conjugative mutant strains with oriT and relaxase deleted===
 +
Method 1: pKO3 system
 +
 
 +
1. Use plasmid pKO3 to generate precise deletions of oriT region in conjugative plasmids through homologous recombination.
 +
 
 +
2. For working principle of pKO3 please refer to: Link A. et al., (1997) J Bacteriol 179: 6228.
 +
 
 +
3. For more experimental details please visit [http://www.openwetware.org/wiki/IGEM:Peking/2007/Count:Knockout| Knockout protocol in our OWW site].
 +
 
 +
 
 +
Method 2: Lambda Red system
 +
 
 +
1. Use plasmid pKD46 and homologous PCR products to inactivate genes of relaxase in conjugative plasmids.
 +
 
 +
2. For working principle of Lambda Red system please refer to: Datsenko KA et al., (2000). Proc Natl Acad Sci USA 97: 6640
 +
 
 +
3. All experimental details are essentially the same as it is mentioned in the paper above.
 +
 
 +
 
 +
Method 3: Reversed cyclic PCR
 +
 
 +
1. Used for in vitro construction of plasmid pSC101, a conjugative plasmid in size of 9 kbp.
 +
 
 +
2. For deletion a region in the plasmid, a pair of primers adjacent to the target region is first design (with the same restriction site), then mixed with plasmid pSC101 for PCR.  The resulting product is self-ligated using single enzyme digestion condition and transferred into DH5a.
-
[[Image:Peking_GFP_both.jpg|500px]]
 
 +
Achievement:
-
====Constructing the Bistable Switch====
+
1. Successfully deleted oriT region in plasmid F and plasmid pSC101 【brick name】.
-
We modify the wild type PRM/PR region of lambda phage so that it can be repressed by CI and CI434 in opposite transcription direction. As shown in Fig 3(a), two different promoter designs are considered. The first is to replace OR3 with two CI434 binding site, while the second is to add them after OR3. Three SD signals are selected as candidates. pSB3K3 plasmid is chosen to carry the switch. The plasmid is transformed into strain DH5alpha. The culture is then plated over night. It turns out that the first promoter design shows bistable characteristic, namely, a fraction of the colons express RFP while others express EGFP (Fig 3 (b) and (c)).
+
-
[[Image:Peking switch Fig3a.JPG|600px]]
+
2. Successfully inactivated genes of relaxase in plasmid F, R751 and pSC101 【brick name】.
-
[[Image:Peking switch Fig3b.JPG|600px]]
+
-
[[Image:Peking switch Fig3c.JPG|600px]]
+
===Construct one unified strain containing multiple conjugation systems===
-
====Constructing the NOR Gate====
+
To construct one unified strain containing multiple conjugative plasmids (all with relaxase deleted), it is relatively difficult to extract the mutated plasmids from constructed mutants and transform them into one strain, because of the large size of conjugative plasmid (50 – 100 kbp). We propose to transfer all conjugative plasmids into one recipient cell before deleting the oriT region and relaxase. Proper selective markers will be added to conjugative plasmids before transferring.
-
We combine the SOS gene promoter with LacI binding site so that it can be repressed by both LacI and LexA. In order to obtaining a satisfying NOR gate, we make 15 combinations to cover various possibilities. As shown in Fig 4, LacO1, LacO2, LacO3 are LacI binding sites of different affinity. recAop and sulAop are LexA binding sites from two SOS genes, sulA and recA respectively. ‘designed’ is the most consensus LexA binding site. Plac, Prec, PsulA are wild type promoters (from -35 region to +1) of lac operon, recA and sulA respectively. EGFP is constructed downstream to these promoters in plasmid pLX007, serving as a reporter.
+
-
[[Image:Peking Swich fig.4.JPG|600px]]
+
-
====Measuring the NOR Gates====
 
-
The plasmid is transformed into strain CAJ64 ((del)(colB-lacI)3, relA1, spoT1, trpT171(UGAs)). The culture is irradiated in mid-log phase. Thereafter, samples are taken every half hour. The cell length and EGFP level are measured by FACS.
 
-
*SOS response in CAJ64. During SOS response, the length of the cell correlates with LexA protein level. When LexA level is low, a SOS gene sulA is activated and represses cell division, so that the cell grows longer.  From Fig 5, we can infer that LexA level decreases within half an hour and starts to re-accumulate after 2 hours. 
 
-
[[Image:Peking Swich fig.5.JPG|500px]]
 
-
*In order to compare ‘sulAop’, ‘recAop’ and ‘designed’, we measure the response curve in the absence of LacI. As shown in Fig 6, the promoter with two ‘sulAop’ has both large induction fold and high expression level.
 
-
[[Image:Peking Swich fig.6.JPG|500px]]
 
-
*Based on the results above, we choose SD1, SD2, SD3 to have further testing. A plasmid with LacI is transformed into CAJ64. IPTG is added prior to UV irradiation, to vary the effective level of LacI. As shown in Fig 7, SD2 behaves most similar to a NOR Gate.
 
-
[[Image:Peking switch Fig7b.JPG|800px]]
 
====Summary ====
====Summary ====
-
We have constructed and tested the '''Bistable Switch''' and '''NOR Gate''' which are the basic elements of the push-on push-off switch. The mathematical model also sheds light on how to connect these two elements together to make the circuit work. The relative abundance of various regulators can be fine-tuned by changing the SD signals which we have measured. Our next step would be combine the two parts and realize an integrate system working as expected
 

Revision as of 14:45, 26 October 2007

Contents

Abstract:

To meet the need of spatial differentiation in an assembly line, the hop count provides the number of network devices between the starting node and the destination node. We have developed the system of hop-count conjugation for cell-cell communication within a network of Escherichia coli. Here, the signals transferred are represented by DNA sequence, and record the times of transfer by losing tandem region at every conjugation event. To construct this system, tandem oriT pairs (BBa_J01002 and more) are inserted into signaling plasmid, and relaxase responsible for initiating conjugation events are removed from natural conjugation system and (attaching a terminator) inserted between these oriT pairs. At each single conjugation event, with the expression relaxase, the corresponding tandem oriT pair is lost with the rolling-cycle replication. Sequential conjugation and deletion of the different oriT pairs can be achieved by fine control of relaxase expression. The resulting tandem signaling conjugation process will allow us to develop networks of bacteria capable of sequentially assembling tasks.

Achievement:

Peking Pass.JPGMeasure conjugation efficiency of multiple conjugative strains

Peking Pass.JPGConstruct conjugative mutant strains with oriT and relaxase deleted

Peking Pass.JPGMeasure efficiency and specificity of multiple riboregulator pairs

Peking Notdoneyet.jpgConstruct signaling plasmid with tandem-oriT pairs

Peking Notdoneyet.jpgConstruct one unified strain containing multiple conjugation systems


Design principle

Two key players of bacterial conjugation from donor cells to recipients we concern here are relaxase and oriT (origin of transfer). oriT is responsible for the initiation and termination of roll-cycling DNA replication during conjugation. The transfer of conjugative plasmid from one cell to another, in the form of single strand, starts from one half of oriT and ends at another half, separated by a “nick”. The nick site is generated by relaxosome, and relaxase is a major composition of it.

In cells with relaxase deleted, the process of conjugation is not supposed to happen due to the failure of nick site formation. Furthermore, if two oriT instead of one are located on the conjugative plasmid, the process of transferring DNA will start from one oriT and ends at another. Consequently, regions between two oriT without vegetative replication origin will be lost in recipient cells [Draper O et al., (2000). J Bacteriol 182:3191].

Each group of conjugative plasmid has specific relaxase and oriT. Therefore, the sequential conjugation process can be achieved by using one signaling plasmid with multiple sets of oriT pairs and relaxase (and terminators), and multiple conjugative plasmids with their relaxases deleted. All relaxases are controlled by the same promoter. As a result, the next relaxase expresses following the success of the former conjugation. To report the ending of tandem conjugation process, a reporter gene is attached after the last oriT pair, and hence expresses after all conjugation events happened.

Tandem conjugation.jpg


Measure conjugation efficiency of strain with conjugative plasmid F

Donor strain Signaling plasmid Conjugation efficiency
F-wild-type one F-oriT 0.050
F-wild-type a pair of F-oriT 0.032
F-oriT-Knockout one F-oriT 0.061
F-oriT-Knockout a pair of F-oriT 0.037
  • Conjugation efficiency: percentage of successful conjugation events to donor cells

Conclusion:

1. The deletion of oriT in wild type conjugative plasmid increases the conjugation efficiency of signaling plasmid by 20%.

2. A pair of oriT decreases the conjugation efficiency by 40%.


Construct signaling plasmid with tandem-oriT pairs

We use standard assembly protocols to construct signaling plasmid. To make sure every achievement is a solid progress to our goal, we designed a product map following industrial principle.

Peking Product Map.jpg

One outstanding achievement is that we have constructed 【brick name】 and tested it with conjugation experiment, getting a positive result with the reporter gene expressed.

Peking oriT pair.jpg Peking GFP both.jpg

Left: After conjugation with a pair of oriT. The reporter GFP expresses due to the deletion of terminator.

Right: Control strain with no GFP expressed.

Conclusion:

1. Genes express properly in a signaling plasmid with the oriT pair deleted.

2. We successfully implemented and verified conjugation-deletion events with F system (binary hop count).


Construct conjugative mutant strains with oriT and relaxase deleted

Method 1: pKO3 system

1. Use plasmid pKO3 to generate precise deletions of oriT region in conjugative plasmids through homologous recombination.

2. For working principle of pKO3 please refer to: Link A. et al., (1997) J Bacteriol 179: 6228.

3. For more experimental details please visit [http://www.openwetware.org/wiki/IGEM:Peking/2007/Count:Knockout| Knockout protocol in our OWW site].


Method 2: Lambda Red system

1. Use plasmid pKD46 and homologous PCR products to inactivate genes of relaxase in conjugative plasmids.

2. For working principle of Lambda Red system please refer to: Datsenko KA et al., (2000). Proc Natl Acad Sci USA 97: 6640

3. All experimental details are essentially the same as it is mentioned in the paper above.


Method 3: Reversed cyclic PCR

1. Used for in vitro construction of plasmid pSC101, a conjugative plasmid in size of 9 kbp.

2. For deletion a region in the plasmid, a pair of primers adjacent to the target region is first design (with the same restriction site), then mixed with plasmid pSC101 for PCR. The resulting product is self-ligated using single enzyme digestion condition and transferred into DH5a.


Achievement:

1. Successfully deleted oriT region in plasmid F and plasmid pSC101 【brick name】.

2. Successfully inactivated genes of relaxase in plasmid F, R751 and pSC101 【brick name】.


Construct one unified strain containing multiple conjugation systems

To construct one unified strain containing multiple conjugative plasmids (all with relaxase deleted), it is relatively difficult to extract the mutated plasmids from constructed mutants and transform them into one strain, because of the large size of conjugative plasmid (50 – 100 kbp). We propose to transfer all conjugative plasmids into one recipient cell before deleting the oriT region and relaxase. Proper selective markers will be added to conjugative plasmids before transferring.


Summary