Edinburgh/DivisionPopper/Design

From 2007.igem.org

(Difference between revisions)

Revision as of 13:18, 20 September 2007

In the Design section we define the architecture (design), the biology elements (implementation) and the mechanisms (dynamics) of the device. According to the [http://partsregistry.org/cgi/htdocs/AbstractionHierarchy/index.cgi abstraction levels hierarchy], we propose the view of the Division PoPper at the level of device, parts and DNA. Regarding to the dynamics we explain which are the biological processes involved and how they cooperate in defining the behaviour of the device. The logic design and implementation phases have been decoupled.

Design

In this section we explain which are the functional components of the device and how they are connected logically and physically. The view on the device is given following the [http://partsregistry.org/cgi/htdocs/AbstractionHierarchy/index.cgi abstraction hierarchy] proposed in the Registry of Parts.

Device abstraction level of the Division Counter

The Division PoPper device generates an input in the form of PoPS signal.

Device abstraction level

The Division PoPper is a device, because it is a functional element that can be further compose with other devices by the use of a standard PoPS signal. The device has no formal input but its behaviour is triggered by an "external" stimulus: the cell division. The output is a PoPS signal that is supposed to be always zero (not considering leaking issues in the promoters) apart when a cell divion happens. In this case the device generates a pulse: the PoPS signal reaches a non-zero level for a period of time, returning to zero value afterward. The function of the device is simple: to inform a downstream device that a division happened by sending a pulse signal. We suggests some systems configuration in the Applications section.

Part abstraction level (Design)

Design of the part structure in the Division PoPper device.

Part abstraction level

At the level of part abstraction we define the functional parts of the device: regulatory regions, coding regions, terminators and so on. Instead of proposing directly the actual biological entities, we propose here a logic view. Strictly speaking, we defines entities by their attributes and abilities, but without mapping them to real biological objects. This is done then in the Implementation section below. The motivation is to separate the functional design from the realization choices.

The Division PoPper functional parts are:

two recombinase site sequences: Rec.
a promoter A that can be repressed by protein A: promoter A.
a coding region for protein A: repressor A.
a promoter B that can be repressed by protein B: promoter B.
a coding region for protein B: repressor B.
a promoter P that is constitutively active (expressing).

The functional ability that these entities should have are:

the region between Rec recombinase site sequence is flipped (reversed horizzontally and vertically) at each cell division.
the protein A and protein B degredation rate should be fast enough to degrade them rapidely when not expressed.
the protein A and protein B effects on (respectively) the promoter A and B expression capacity should be strong.
promoter P should be strong in is constitutive expression.

The physical configuration:

The design relies on the alternate expression of the two strands of the DNA segement in between the Recombinase sites. Promoter P is placed outside the "flipping region" and controls its downstream region in the upper strand. The output of the device is given by the PoPS activity on the upper strand downstream the last recombinase site. Since the region in between the recombinase sites flips, the output is controlled alternatively by the two DNA strands. In one strand the parts sequence is: repressor A, terminator, Promoter A. In the other the sequence is: repressor B, terminator, Promoter B.

The dynamics:

As cell division occurs, DNA enclosed by two inverted Rec sites is reversed. Initially the device is in the configuration with Repressor A and Promoter A on the upper strand. There is no Repressor A presents in the cell so Promoter A produces a constant PoPS output. As time passes, Repressor A production is turned on and 'turns off' Promoter B. Meanwhile Repressor B is no produced and degrades so that, at the next division, Promoter B can produce PoPS output and the process repeats. This mechanism can be seen as the sequence of three phases: Forward, Flipping and Backward. We explain for each phases the dynamics:

Configuration	Processes	Output
	During this phase, the output of the device is controlled by promoter A. We assume there is no Repressor A concentration at the beginnig. Thus Promoter A generates a flux of PoPS output. After some time Rrepressor A builds up, since the constitutive promoter P placed upstream controls is expression. When the concentration of Repressor A is enough, the flux of PoPS goes to zero. In the meanwhile the expression of Repressor B is not active. Thus the concentration of Repressor B should decrease to a low level.	Controlled by Promoter A.
	When a division of the cell happens, the recombinase system is activated. During this phase there is no physical active connection between the output region and a promoter, thus the PoPS flux is considered to be zero.	Not controlled, expression should be zero.
	During this phase, the output of the device is controlled by promoter B. We assume there is a low Repressor B concentration at this time. Thus Promoter B generates a flux of PoPS output. After some time Rrepressor B builds up, since the constitutive promoter P placed upstream controls is expression. When the concentration of Repressor B is enough, the flux of PoPS goes to zero. In the meanwhile the expression of Repressor A is not active. Thus the concentration of Repressor A should decrease to a low level.	Controlled by Promoter B.

Implementation

In the previous section we define which functional components are needed at the level of parts. In this section the members with biology competences evaluate the design and identify the actual biological parts that can be used. Further on the DNA abstraction level details are proposed.

Part abstraction level (Implementation)

Implementation of the part structure in the Division PoPper device.

Part abstraction level

The Division PoPper parts are:

two Dif recombinase sites (design: Rec).
Tet promoter (design: promoter A).
TetR repressor (design: repressor A).
CLambda promoter (design: promoter B).
CLambda repressor (design: repressor B).
Lac promoter (design: promoter P).

The Registry of Standard Parts contains already some of the elements we need, for the others we constructed and added their Biobricked version.

The Division PoPper parts registry entries are:

two Dif recombinase sites: [http://partsregistry.org/Part:BBa_I742101 BBa_I742101],[http://partsregistry.org/Part:BBa_I742102 BBa_I742102]
Tet promoter:[http://partsregistry.org/Part:BBa_R0040 BBa_R0040]
TetR repressor:[http://partsregistry.org/Part:BBa_C0040 BBa_C0040]
CLambda promoter:[http://partsregistry.org/Part:BBa_R0051 BBa_R0051]
CLambda repressor:[http://partsregistry.org/Part:BBa_C0051 BBa_C0051]
Lac promoter:[http://partsregistry.org/Part:BBa_I14032 BBa_I14032]

(for the group: codes need to be controlled).

The assumption on the biological elements are:

The Dif sites flip only once during each cell division
TetR and ClambdaR are produced and degrade faster than the cell cycle

For this device to work, dif site-enclosed DNA needs to flip but once per division. Like all recombination sites, dif-sites are directional and bacteria uses directly repeated dif-sites to resolve genome dimers. Research shows that this resolution occurs only at septation, and we use this temporal control to inverse a plasmid-kept sequence to induce different functions. For more information look at the Background section.

DNA abstraction level

Details at the level of DNA (TO DO).

Biology Processes

Use of the Edinburgh Pathway Notation to express the biological processes.

Proof of Concept

YFP (BBa_E0430)

As stated before, the device relies on the dif site flipping only once per cell division. To test whether or not this actually happens, we have devised two simpler experiments.

Exp 1

This experiment will prove whether or not the DNA between the two dif sites flip at all during cell division. If the a flip occurs, then the direction the promoter operates will be changed and GFP will be expressed.

Exp 2

This investigates the number of flips that occurs during division and will require rapidly degrading fluorescent proteins.

After each division we expect to see a change in colour as the promoter activates a different reporter.

Exp 3

Currently we are planning to test how the dif sites flip using exps 1 & 2. The final device requires a few more parts, each of which needs to be tested.

We might wish to test the repressors without the dif sites

The repressor part of the system is simply a pair of inverters.

There are 3 basic types of inverter in the registry:

TetR BBa_Q04400 “this inverter functions well. [jb, 5/24/04]”
CI (Lambda) BBa_Q04510 “this inverter functions well. [jb, 5/24/04]”
LacI BBa_Q04121 "a strong 'on' state with significant background in the 'off' state. [jb,5/24/04]”

exp 3 design

This will test to see if promoter B causes problems with promoter 0's promoting repressor A and tests the standard repressor inverter found in the registry.

Parts required:

Promoter 0 – suggest BBa_I0500 (arabinose) – Plate 2, 9I
Promoter B – reverse complimentary lacI promoter – Used in exp 1
Inverter – suggested BBa_Q04510 (CI (Lambda)) – Plate 2, 13K
Reporter – use same as experiment 1

Biobricks Required

Biobricks From Registry

Part	For use in	Brick used
Reporter	Exp1, Exp2, Exp3	[http://partsregistry.org/Part:BBa_E0422 BBa_E0422] - Fast Degrading ECFP
Inverter	Exp3	[http://partsregistry.org/Part:BBa_Q04510 BBa_Q04510] - CI (Lambda) Inverter
Promoter 0	Exp3, Final PoPper
Promoter A	Final PoPper
Repressor (+RBS) A	Final PoPper
Central Terminator	Final PoPper

Biobricks requiring construction

Part	For use in
Dif sites	Exp1, Exp2, Final PoPper
Reversed Promoter B	Exp1, Exp3, Final PoPper
Reversed Repressor (+RBS)B	Final PoPper

@@ Line 127: / Line 127: @@
 * TetR repressor:[http://partsregistry.org/Part:BBa_C0040 BBa_C0040]
 * CLambda promoter:[http://partsregistry.org/Part:BBa_R0051 BBa_R0051]
-* CLambda repressor:[http://partsregistry.org/Part:BBa_C0051 ]
+* CLambda repressor:[http://partsregistry.org/Part:BBa_C0051 BBa_C0051]
 * Lac promoter:[http://partsregistry.org/Part:BBa_I14032 BBa_I14032]

Views

Personal tools

Edinburgh/DivisionPopper/Design

From 2007.igem.org

Revision as of 13:18, 20 September 2007

Contents

Design

Device abstraction level

Part abstraction level

Implementation

Part abstraction level

DNA abstraction level

Biology Processes

Proof of Concept

Exp 1

Exp 2

Exp 3

Biobricks Required

Biobricks From Registry

Biobricks requiring construction