USTC/Repressor Evolution on Plates

From 2007.igem.org

< USTC(Difference between revisions)
m (Repression Assay)
m
 
(68 intermediate revisions not shown)
Line 1: Line 1:
-
== Why to design repressor-operator pairs ==
+
== Wires in Bio-logic Circuit ==
-
We have been attempting to construct several artificial repressor-operator pairs to serve as the connecting wires of our system, based on the knowledge of LacR and its binding site, and by means of protein design. We decide that they should be newly designed for three reasons,  
+
In electronic circuit, metal conductor such as copper is used as wires widely. But in a cell, most of the things are diffusive, so it is a difficult problem to limit a signal in a specific signal channel. High-specific regulator-operator pairs can be used as "copper wires" in bio-logic circuit. It means, repressor or activator transmit a particular signal from the upstream output port to the downstream input port, without interference between each other, like carrier wave in FM radio.
-
# The number of natural regulators well studied is limited.
+
 
 +
 
 +
=== Why to Design Artificial High-Specific Repressor-Operator Pairs ===
 +
 
 +
We have been attempting to construct several artificial high-specific repressor-operator pairs to serve as the connecting wires of our system, based on the knowledge of LacR and its binding site [[USTC/Repressor_Evolution_on_Plates#References|[1, 10]]], and by means of directed evolution and computational protein design. We decide that they should be newly designed for several reasons,
 +
 
 +
# The number of natural regulators well studied is moderate [[USTC/Repressor_Evolution_on_Plates#References|[11]]].
# Natural regulators do have some disadvantages.  
# Natural regulators do have some disadvantages.  
-
#* For example, it is well known that there are dozens of downstream regulatory sites of CRP in E.Coli, and if we abuse the CRP, some other natural pathways in the host bacterial will probably be interrupted.  
+
#* For example, it is well known that there are dozens of downstream regulatory sites of CRP in E.Coli, and if we abuse the CRP, some other natural pathways in the host bacterial will probably be interrupted [[USTC/Repressor_Evolution_on_Plates#References|[2]]].  
-
# There may be several unknown sites to be bound with the selected native activators, and we might get unexpected results in such situations.  
+
#* There may be several unknown sites to be bound with the selected native activators, and we might get unexpected results in such situations.
 +
# This artificial repressor family hold the same property for our cis-acting logic promoters, such as dimerization ad tetramerization [[USTC/Repressor_Evolution_on_Plates#References|[1]]].
-
== Start: Lac repressor ==
+
[[Image:USTC_allen1.jpg|thumb|center|500px|'''Figure 1'''  Comics: All we need are the specific artificial 'repressor fish' that can definitely bite the specific 'operator hook' exclusively]]
-
[[Image:USTC_1l1m_bio_r_500.jpg|thumb|'''Figure 1''' Solution structure of a dimer of Lac repressor DNA-binding domain complexed to its natrual operator O1 ([http://www.rcsb.org/pdb/explore.do?structureId=1L1M From RCSB])]]
 
-
[http://en.wikipedia.org/wiki/Lac_repressor From Wikipedia]:  
+
== Start: Lac repressor ==
-
The lac repressor is a DNA-binding protein which inhibits the expression of genes coding for proteins involved in the metabolism of lactose in bacteria. It is active in the absence of lactose, ensuring that the bacterium only invests energy in the production of machinery necessary for the uptake and metabolism of lactose when lactose is present. When lactose becomes available, it is converted into allolactose, which inhibits the lac repressor's DNA binding ability.
+
[[Image:USTC_1l1m_bio_r_500.jpg|thumb|'''Figure 2''' Solution structure of a dimer of Lac repressor DNA-binding domain complexed to its natrual operator O1 ([http://www.rcsb.org/pdb/explore.do?structureId=1L1M From RCSB])]]
-
The lac repressor protein has three distinct regions:
+
The lac repressor in Lac operon is a well-studied transcriptional factor involved in the metabolism of lactose in bacteria. It has three distinct regions :
-
* a core region (which binds allolactose)
+
* a headpiece which recognize DNA and joins two monomers to form a dimer at the same time
-
* a tetramerization region (which joins four monomers in an alpha-helix bundle)
+
* a core region which binds allolactose and IPTG
-
* a DNA-binding region (in which two LacI proteins bind a single operator site)
+
* a tetramerization region which joins four monomers in an alpha-helix bundle)
-
The lac repressor occurs as a tetramer (four identical subunits bound together). This can be viewed as two dimers, with each dimer being able to bind to a single lac operator. The two subunits each bind to a slightly separated (major groove) region of the operator. The promoter is slightly covered by the lac repressor so RNAP cannot bind to and transcribe the operon.
+
The DNA binding region of Lac repressor consists of a helix-turn-helix structural motif and has been well studied as a model structure of transcription factor in helix-turn-helix family[[USTC/Repressor_Evolution_on_Plates#References|[1,3]]].
-
The DNA binding region consists of a helix-turn-helix structural motif.
 
== Selection of operator sequence ==
== Selection of operator sequence ==
-
By means of bioinformatics we can select a DNA sequence that has never appeared in the genome of E.Coli, and let the regulator bind to the sequence with quite high specificity,. Therefore, we will not have to worry about the regulator’s interrupting the normal functioning of the host genome.
+
By means of bioinformatics we can select a DNA sequence that has never appeared in the genome of E.Coli, and let the regulator bind to the sequence with quite high specificity and high affinity [[USTC/Repressor_Evolution_on_Plates#References|[6]]]. Therefore, we will not have to worry about the regulator’s interrupting the normal functioning of the host genome (A tiny exception: the host strain should not contain <i>lacI</i> and lac promoter, such as [http://openwetware.org/wiki/E._coli_genotypes#TOP10_.28Invitrogen.29 Top10]).
 +
 
 +
    O11 aattgtgagcgctcacaatt
 +
    O22 aattgtaagcgcttacaatt
 +
    O33 aattgtaaacgtttacaatt
 +
    O44 aattgtgaacgttcacaatt
 +
    O55 aattttgagcgctcaaaatt
 +
    O66 aattatgagcgctcataatt
 +
    O77 gacgactgtatacagtcgtc
 +
 
 +
 
 +
 
 +
 
 +
----
 +
== Directed Repressor Evolution ==
 +
 
 +
=== Targeted Mutagenesis ===
 +
[[Image:USTC_allen2.jpg|thumb|right|300px|'''Figure 3'''  The recognition region of Lac repressor of which the amino acid residues we will try to modify. This figure comes from 'Roberto Kopke Salinas, etc. ''ChemBioChem 2005, 6, 1628 – 1637'']]
 +
 
 +
Figure 3 shows the recognition region of which the amino acid residues we will try to modify. With saturation mutagenesis [[USTC/Repressor_Evolution_on_Plates#References|[4, 5]]], it is possible to create a library of mutants containing all possible mutations at these positions. Because the targeted sites are near to the beginning of the <i>lacI</i> gene yet beyond the range of one primer region, two steps of PCR  are carried out to generate the random repressor family shown in Figure 4. Then the PCR production is purified and digested, loaded into the repressor-production plasmid to take the repression assay.
 +
 
 +
[[Image:USTC_RepressorMutagenesis.png|thumb|left|350px|'''Figure 4'''  Random repressor family generation by PCR.]]
 +
 
 +
<BR clear="both">
 +
 
 +
=== Repression Assay ===
 +
 
 +
With the help of pUC-repressor and pZS*-reporter, the two plasmids shown in Figure 5, we will be able to accomplish the repression assay.
 +
 
 +
The first plasmid is in charge of repressor production, that is, to express the repressor constitutively. The second plasmid contains two reporter genes, <i>lacZ</i> (alpha fragment) and <i>gfp-AAV</i>, respectively, and an upstream promoter that reflects the repression effect in the form of binding intensity. Once the repression exists, the promoter will lose its activity. Consequently, neither of the downstream lacZ or GFP-AAV reporter gene will work. By reading the blue/white colonies on a plate with naked eyes and the fluorescence intensity of GFP with a fluorescence microscope, we can finally get to know the repression effect, and can ratiocinate from it the binding affinity of the repressor-operator pair.
 +
 
 +
[[Image:ustc_repressor_assay.png|thumb|center|600px|'''Figure 5'''  (a) Left: Plasmid pUC-repressor, a repressor-production plasmid. Right: Plasmid pZS*-reporter, a repression-reporter plasmid. If the repressor produced by pUC-repressor is able to repress the promoter on pZS*-reporter, neither the activity of beta-galactosidase nor the expression of GFP will be observed. (b) Scheme of the promoter on the pZS*-reporter. There are two repressor binding sites around the RNA polymerase binding site. If the designed repressor is able to bind the designed operator, the activity of the promoter will be repressed.]]
 +
 
 +
=== Screening ===
 +
 
 +
First, pUC-repressor plasmid containing random repressor family members are transformed into Top10/pZS*-PO_target-lacZa. White colonies, which shows that repressors there can repress the target promoter, are select from Blue/White Screening on top agar Luria-Bertani broth. The repression should be re-tested to eliminate the false positive samples by X-gal assay and PCR checking. The survivals will be quantificationally measured in ONPG assay or fluorescent assay.
 +
 
 +
[[Image:USTC_repressor_screening.jpg|thumb|center|600px|'''Figure 6'''  (a) One of the Blue/White screening plates. The red-marked colony are a target. (b) One of the plates in the repression assay. The blue or light blue colonies show the repressor expressed in the strains cannot or can weakly binding to the specified operator sequence, and in contrast, the repressor produced in the white colonies can repress the specified promoter. (c) PCR checking for promoter and lacZ alpha fragment.]]
 +
 
 +
===Quantitive Assay(Cross Repression Test)===
 +
We selected 7 repressor-promoter pair candidates from Blue/White Screening results above for quantitive assay of specificity and affinity. In addition, 2 existed represor-promoter pairs are added to this work as new candidates. Then, each repressor-expression plasmid is transform to each Top10 competent cell with specific target promoters. Eventually, each expression quantity of LacZ alpha or GFP is measured by ONPG assay(LacZ) or fluorescent assay(GFP).The process are shown as below.
 +
 
 +
[[Image:USTC_ crossrepressiontest.jpg|center|600px]]
 +
 
 +
 
 +
 
 +
 
 +
----
 +
== Results ==
 +
 
 +
The consequent data of reporter's expression is, by formula, converted to the Repression Value(R.V.) representing the repression intensity of each repressor-promoter pair. From the formula below we can see higher value of R.V. represents the higher expression of reporter gene and indicates a lower repression while the reverse represents a high repression. The sets of R.V. is  depicted  on the scheme below which have been transformed to corresponding Repression Matrix-more visual that the coordinate scheme. And the Orthogonal Repression Matrix birthing from Repression Matrix can be used to acquire specific repressor-promoter pairs with high specificity.
 +
 
 +
[[Image:USTC_rv.jpg|500px|center]]
 +
 
 +
 
 +
<!--
 +
=== Repression Scheme ===
 +
 
 +
The directed results are charted on one coordinate scheme.
 +
 
 +
[[Image:USTC_RepressionScheme.jpg|thumb|center|550px|'''Figure 7''' This scheme indicates the cross repression test of our repressor and promoter candidates. The vertical axis tell us the Repression Value(R.V.) of each repressor-promoter pairs by plots, in which the higher R.V.shows the higher expression of reporter protein(even exceed the condition without repressors)-the low repression. The horizontal axis represents the different repressors, and the colors represent different promoters]]
 +
-->
-
    O1 aattgtgagcgctcacaatt
+
=== Repression Matrix ===
-
    O2 aattgtaagcgcttacaatt
+
-
    O3 aattgtaaacgtttacaatt
+
-
    O4 aattgtgaacgttcacaatt
+
-
== Repressor design ==
+
Performances of our wires are shown as so-called "Repression Matrix", an array of R.V. with variant combinations of artificial repressors and operators. A "Repression Matrix" taken from the literature [[USTC/Repressor_Evolution_on_Plates#References|[7,8,9]]] and uniformed is also plotted in [[USTC/RepressionMatrixFromLiterature|this page]].
-
[[Image:USTC_lac_mutation_sites.png|thumb|'''Figure 2''' The recognition region of Lac repressor of which the amino acid residues we will try to modify.]]
+
[[Image:USTC_RepressionMatrix.png|thumb|center|500px|'''Figure 8''' Repression Metrix(RM):The repression matrix reveals the binding affinity of different repressor candidates with various specific promoters by different colors. The deeper the red will be, the higher the repression will appear. While the lighter the blue is the weaker the repression will show.]]
-
Figure 2 shows the recognition region of which the amino acid residues we will try to modify. We attempt to minimize the binding energy of DNA and protein between the recognition region and the target operator to find the optimal composition and arrangement of the amino acid residues of the recognition regions.
+
=== Orthologal Repression Matrix ===
-
With this computational method in silicon, we are able to screen thousands of proteins in a faster and cheaper way, compared with the traditional wet experimental methods.
+
[[Image:USTC_OrthologalRepressionMatrix.png|thumb|rught|200px|'''Figure 9''' Orthologal Repression Metrix(ORM)-One of the ORM comes from above RM:The red diagonal of this matrix indicates that each target repressor can only firmly bind to its specific target promoter and has weak or even no binding to other operator sequences.]]
 +
Several 'wires' without interference are selected based on that repressors can only specifically bind to the right promoter without strong repressed interaction with other promoters which have their own special repressors. Thereby, the red color plot in Repression Matrix should be placed on the right site by interchange of columns so that each row and each column in the Matrix can have only one red plot. The other repressor candidate columns which cannot pass muster will be deleted from the RM. Eventually, a 3x3 Orthogonal Repression Matrix for [[USTC/Demonstration|the demonstration system]] shown in Figure 9, which looks like an orthogonal matrix in mathematics, contains single red plot in each column & each row, reflecting the specific repression.
 +
----
 +
== References ==
 +
1. Lewis, M. (2005), 'The lac repressor.', <i>C R Biol 328</i> (6), 521--548.
 +
2. Lac Operon, http://en.wikipedia.org/wiki/Lac_Operon
 +
3. Kalodimos, C. G.; Bonvin, A. M. J. J.; Salinas, R. K.; Wechselberger, R.; Boelens, R. & Kaptein, R. (2002), 'Plasticity in protein-DNA recognition: lac repressor interacts with its natural operator 01 through alternative conformations of its DNA-binding domain.', <i>EMBO J</i> 21(12), 2866--2876.
 +
4. Arnold, Frances H. and Georgiou, George. ' Directed Evolution Library Creation, Methods and Protocols', <i>Methods in Molecular Biology<i>, Humana Press, Volume 231, 2003
 +
5. Arnold, Frances H. and Georgiou, George. ' Directed Evolution Library Creation, Screening and Selection Methods', <i>Methods in Molecular Biology</i>, Humana Press, Volume 230, 2003
-
==Repression Assay==
+
6. Sadler, J. R.; Sasmor, H. & Betz, J. L. (1983), 'A perfectly symmetric lac operator binds the lac repressor very tightly.', <i>PNAS</i> 80(22), 6785--6789.
-
With the help of two plasmids, pUC-repressor and pZS*-reporter, which are showed in Figure 3, we will be able to accomplish the repression assay.
+
7. Lehming, N.; Sartorius, J.; Niemöller, M.; Genenger, G.; v Wilcken-Bergmann, B. & Müller-Hill, B. (1987), 'The interaction of the recognition helix of lac repressor with lac operator.', <i>EMBO J</i> 6(10), 3145--3153.
-
The first plasmid is in charge of repressor production, that is, expressing the repressor constitutively. Plasmid pUC-repressor serves to equate the binding of protein to DNA with the repression effect to the promoter.
+
8. Lehming, N.; Sartorius, J.; Oehler, S.; von Wilcken-Bergmann, B. & Müller-Hill, B. Recognition helices of lac and lambda repressor are oriented in opposite directions and recognize similar DNA sequences. <i>PNAS</i>, 1988, 85, 7947-7951
-
The second plasmid is composed of two reporter genes, <i>lacZ</i> (alpha fragment) and <i>gfp-AAV</i>, respectively, and an upstream promoter that reflects the repression effect in the form of binding intensity. Once the repression exists, the promoter will lose its activity. Consequently, neither of the downstream lacZ or GFP-AAV reporter gene will work. By reading the blue/white clones on a plate with naked eyes and the fluorescence intensity of GFP with a fluorescence microscope, we can finally get to know the repression effect, and can ratiocinate from it the binding affinity of the repressor-operator pair.
+
9. Sartorius, J.; Lehming, N.; Kisters, B.; von Wilcken-Bergmann, B. & Müller-Hill, B. (1989), 'lac repressor mutants with double or triple exchanges in the recognition helix bind specifically to lac operator variants with multiple exchanges.', <i>EMBO J</i> 8(4), 1265--1270.
-
[[Image:ustc_repressor_assay_overview.jpg|thumb|right|379px|'''Figure 3'''  Left: Plasmid pUC-repressor, a repressor-production plasmid. Right: Plasmid pZS*-reporter, a repression-reporter plasmid. If repressor produced by pUC-repressor is able to repress the promoter on pZS*-reporter, neither activity of beta-galactosidase nor expression of GFP can be observed.]]
+
10. Salinas, R. K.; Folkers, G. E.; Bonvin, A. M. J. J.; Das, D.; Boelens, R. & Kaptein, R. Altered specificity in DNA binding by the lac repressor: a mutant lac headpiece that mimics the gal repressor.' <i>Chembiochem</i>, 2005, 6, 1628-1637
-
[[Image:ustc_promoter_repressor_binding.jpg|thumb|right|374px|'''Figure 4'''  Scheme of the promoter on the pZS*-reporter. There are two repressor binding sites around the RNA polymerase binding site. So if the designed repressor is able to bind the designed operator, the activity of the promoter will be repressed.]]
+
-
[[Image:USTC_repressor_plate_4a1.jpg|thumb|center|480px]]
+
11. Müller-Hill, B. 'Some repressors of bacterial transcription.' <i>Curr Opin Microbiol</i>, 1998, 1, 145-151

Latest revision as of 01:37, 27 October 2007

Contents

Wires in Bio-logic Circuit

In electronic circuit, metal conductor such as copper is used as wires widely. But in a cell, most of the things are diffusive, so it is a difficult problem to limit a signal in a specific signal channel. High-specific regulator-operator pairs can be used as "copper wires" in bio-logic circuit. It means, repressor or activator transmit a particular signal from the upstream output port to the downstream input port, without interference between each other, like carrier wave in FM radio.


Why to Design Artificial High-Specific Repressor-Operator Pairs

We have been attempting to construct several artificial high-specific repressor-operator pairs to serve as the connecting wires of our system, based on the knowledge of LacR and its binding site [1, 10], and by means of directed evolution and computational protein design. We decide that they should be newly designed for several reasons,

  1. The number of natural regulators well studied is moderate [11].
  2. Natural regulators do have some disadvantages.
    • For example, it is well known that there are dozens of downstream regulatory sites of CRP in E.Coli, and if we abuse the CRP, some other natural pathways in the host bacterial will probably be interrupted [2].
    • There may be several unknown sites to be bound with the selected native activators, and we might get unexpected results in such situations.
  3. This artificial repressor family hold the same property for our cis-acting logic promoters, such as dimerization ad tetramerization [1].
Figure 1 Comics: All we need are the specific artificial 'repressor fish' that can definitely bite the specific 'operator hook' exclusively


Start: Lac repressor

Figure 2 Solution structure of a dimer of Lac repressor DNA-binding domain complexed to its natrual operator O1 ([http://www.rcsb.org/pdb/explore.do?structureId=1L1M From RCSB])

The lac repressor in Lac operon is a well-studied transcriptional factor involved in the metabolism of lactose in bacteria. It has three distinct regions :

  • a headpiece which recognize DNA and joins two monomers to form a dimer at the same time
  • a core region which binds allolactose and IPTG
  • a tetramerization region which joins four monomers in an alpha-helix bundle)

The DNA binding region of Lac repressor consists of a helix-turn-helix structural motif and has been well studied as a model structure of transcription factor in helix-turn-helix family[1,3].


Selection of operator sequence

By means of bioinformatics we can select a DNA sequence that has never appeared in the genome of E.Coli, and let the regulator bind to the sequence with quite high specificity and high affinity [6]. Therefore, we will not have to worry about the regulator’s interrupting the normal functioning of the host genome (A tiny exception: the host strain should not contain lacI and lac promoter, such as [http://openwetware.org/wiki/E._coli_genotypes#TOP10_.28Invitrogen.29 Top10]).

   O11 aattgtgagcgctcacaatt
   O22 aattgtaagcgcttacaatt
   O33 aattgtaaacgtttacaatt
   O44 aattgtgaacgttcacaatt
   O55 aattttgagcgctcaaaatt
   O66 aattatgagcgctcataatt
   O77 gacgactgtatacagtcgtc




Directed Repressor Evolution

Targeted Mutagenesis

Figure 3 The recognition region of Lac repressor of which the amino acid residues we will try to modify. This figure comes from 'Roberto Kopke Salinas, etc. ChemBioChem 2005, 6, 1628 – 1637

Figure 3 shows the recognition region of which the amino acid residues we will try to modify. With saturation mutagenesis [4, 5], it is possible to create a library of mutants containing all possible mutations at these positions. Because the targeted sites are near to the beginning of the lacI gene yet beyond the range of one primer region, two steps of PCR are carried out to generate the random repressor family shown in Figure 4. Then the PCR production is purified and digested, loaded into the repressor-production plasmid to take the repression assay.

Figure 4 Random repressor family generation by PCR.


Repression Assay

With the help of pUC-repressor and pZS*-reporter, the two plasmids shown in Figure 5, we will be able to accomplish the repression assay.

The first plasmid is in charge of repressor production, that is, to express the repressor constitutively. The second plasmid contains two reporter genes, lacZ (alpha fragment) and gfp-AAV, respectively, and an upstream promoter that reflects the repression effect in the form of binding intensity. Once the repression exists, the promoter will lose its activity. Consequently, neither of the downstream lacZ or GFP-AAV reporter gene will work. By reading the blue/white colonies on a plate with naked eyes and the fluorescence intensity of GFP with a fluorescence microscope, we can finally get to know the repression effect, and can ratiocinate from it the binding affinity of the repressor-operator pair.

Figure 5 (a) Left: Plasmid pUC-repressor, a repressor-production plasmid. Right: Plasmid pZS*-reporter, a repression-reporter plasmid. If the repressor produced by pUC-repressor is able to repress the promoter on pZS*-reporter, neither the activity of beta-galactosidase nor the expression of GFP will be observed. (b) Scheme of the promoter on the pZS*-reporter. There are two repressor binding sites around the RNA polymerase binding site. If the designed repressor is able to bind the designed operator, the activity of the promoter will be repressed.

Screening

First, pUC-repressor plasmid containing random repressor family members are transformed into Top10/pZS*-PO_target-lacZa. White colonies, which shows that repressors there can repress the target promoter, are select from Blue/White Screening on top agar Luria-Bertani broth. The repression should be re-tested to eliminate the false positive samples by X-gal assay and PCR checking. The survivals will be quantificationally measured in ONPG assay or fluorescent assay.

Figure 6 (a) One of the Blue/White screening plates. The red-marked colony are a target. (b) One of the plates in the repression assay. The blue or light blue colonies show the repressor expressed in the strains cannot or can weakly binding to the specified operator sequence, and in contrast, the repressor produced in the white colonies can repress the specified promoter. (c) PCR checking for promoter and lacZ alpha fragment.

Quantitive Assay(Cross Repression Test)

We selected 7 repressor-promoter pair candidates from Blue/White Screening results above for quantitive assay of specificity and affinity. In addition, 2 existed represor-promoter pairs are added to this work as new candidates. Then, each repressor-expression plasmid is transform to each Top10 competent cell with specific target promoters. Eventually, each expression quantity of LacZ alpha or GFP is measured by ONPG assay(LacZ) or fluorescent assay(GFP).The process are shown as below.

USTC crossrepressiontest.jpg




Results

The consequent data of reporter's expression is, by formula, converted to the Repression Value(R.V.) representing the repression intensity of each repressor-promoter pair. From the formula below we can see higher value of R.V. represents the higher expression of reporter gene and indicates a lower repression while the reverse represents a high repression. The sets of R.V. is depicted on the scheme below which have been transformed to corresponding Repression Matrix-more visual that the coordinate scheme. And the Orthogonal Repression Matrix birthing from Repression Matrix can be used to acquire specific repressor-promoter pairs with high specificity.

USTC rv.jpg


Repression Matrix

Performances of our wires are shown as so-called "Repression Matrix", an array of R.V. with variant combinations of artificial repressors and operators. A "Repression Matrix" taken from the literature [7,8,9] and uniformed is also plotted in this page.

Figure 8 Repression Metrix(RM):The repression matrix reveals the binding affinity of different repressor candidates with various specific promoters by different colors. The deeper the red will be, the higher the repression will appear. While the lighter the blue is the weaker the repression will show.

Orthologal Repression Matrix

Figure 9 Orthologal Repression Metrix(ORM)-One of the ORM comes from above RM:The red diagonal of this matrix indicates that each target repressor can only firmly bind to its specific target promoter and has weak or even no binding to other operator sequences.

Several 'wires' without interference are selected based on that repressors can only specifically bind to the right promoter without strong repressed interaction with other promoters which have their own special repressors. Thereby, the red color plot in Repression Matrix should be placed on the right site by interchange of columns so that each row and each column in the Matrix can have only one red plot. The other repressor candidate columns which cannot pass muster will be deleted from the RM. Eventually, a 3x3 Orthogonal Repression Matrix for the demonstration system shown in Figure 9, which looks like an orthogonal matrix in mathematics, contains single red plot in each column & each row, reflecting the specific repression.




References

1. Lewis, M. (2005), 'The lac repressor.', C R Biol 328 (6), 521--548.

2. Lac Operon, http://en.wikipedia.org/wiki/Lac_Operon

3. Kalodimos, C. G.; Bonvin, A. M. J. J.; Salinas, R. K.; Wechselberger, R.; Boelens, R. & Kaptein, R. (2002), 'Plasticity in protein-DNA recognition: lac repressor interacts with its natural operator 01 through alternative conformations of its DNA-binding domain.', EMBO J 21(12), 2866--2876.

4. Arnold, Frances H. and Georgiou, George. ' Directed Evolution Library Creation, Methods and Protocols', Methods in Molecular Biology<i>, Humana Press, Volume 231, 2003

5. Arnold, Frances H. and Georgiou, George. ' Directed Evolution Library Creation, Screening and Selection Methods', <i>Methods in Molecular Biology, Humana Press, Volume 230, 2003

6. Sadler, J. R.; Sasmor, H. & Betz, J. L. (1983), 'A perfectly symmetric lac operator binds the lac repressor very tightly.', PNAS 80(22), 6785--6789.

7. Lehming, N.; Sartorius, J.; Niemöller, M.; Genenger, G.; v Wilcken-Bergmann, B. & Müller-Hill, B. (1987), 'The interaction of the recognition helix of lac repressor with lac operator.', EMBO J 6(10), 3145--3153.

8. Lehming, N.; Sartorius, J.; Oehler, S.; von Wilcken-Bergmann, B. & Müller-Hill, B. Recognition helices of lac and lambda repressor are oriented in opposite directions and recognize similar DNA sequences. PNAS, 1988, 85, 7947-7951

9. Sartorius, J.; Lehming, N.; Kisters, B.; von Wilcken-Bergmann, B. & Müller-Hill, B. (1989), 'lac repressor mutants with double or triple exchanges in the recognition helix bind specifically to lac operator variants with multiple exchanges.', EMBO J 8(4), 1265--1270.

10. Salinas, R. K.; Folkers, G. E.; Bonvin, A. M. J. J.; Das, D.; Boelens, R. & Kaptein, R. Altered specificity in DNA binding by the lac repressor: a mutant lac headpiece that mimics the gal repressor.' Chembiochem, 2005, 6, 1628-1637

11. Müller-Hill, B. 'Some repressors of bacterial transcription.' Curr Opin Microbiol, 1998, 1, 145-151